Narrow Eccentric Collar 2 Bolt Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Eccentric Collar 4 Bolt Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Eccentric Collar Low Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Eccentric Collar 2 Bolt Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Eccentric Collar 4 Bolt Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Eccentric Collar Low Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Eccentric Collar Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Eccentric Collar Solid Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Eccentric Collar Take Up Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Eccentric Collar Tap Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Narrow Eccentric Collar Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Eccentric Collar Solid Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Eccentric Collar Take Up Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Eccentric Collar Tap Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Eccentric collar shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and increased vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Setscrew Locking 2 Bolt Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Setscrew Locking 4 Bolt Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Setscrew Locking Low Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Setscrew Locking 2 Bolt Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Setscrew Locking 4 Bolt Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Setscrew Locking Low Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Setscrew Locking Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Setscrew Locking Solid Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Setscrew Locking Take Up Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Non-Greaseable Narrow Setscrew Locking Tap Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can’t be regreased
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity. These units are plugged to prevent contamination and cannot be re-greased.
For drawings and 3D models, click on a part number.
Narrow Setscrew Locking Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Setscrew Locking Solid Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Setscrew Locking Take Up Flange
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.
Narrow Setscrew Locking Tap Base Pillow Block
- 52100 Alloy Steel
- Service: -10°F to 248 °F
- K-type NBR seals
- C3 internal clearance
- Narrow inner race
- Set screw shaft lock
- Can be greased/PM'd
- Cast iron housing
Can handle light to moderate loads, moderate speed, and vibration. All bearings are equipped with close tolerance metal shields, an internal NBR contact seal (K-type), and factory lubricated with an ISO VG 100 PAO base oil, NLGI No. 2, lithium-stearate thickened grease. They are narrower than the standard duty configuration but have similar capacity.
For drawings and 3D models, click on a part number.